Bluetooth Operation; General Operation - Oxygen audio PULSION 12.1 Manual Del Usuario

6. Bluetooth operation

Pairing a Bluetooth device
Before you can use the amplifier speaker with your phone or other Bluetooth
capable device you will need to pair the device to the amplifier speaker.
1. Press MODE button on unit or
repeatedly until you see the LED indicator shows "BLUE", and then
Bluetooth logo on display stay flashing when no other devices paired.
2. Enable the Bluetooth function on your smart phone and search for a
device labelled "PULSION 12.1" in the available list.
3. Select and enable pairing for the device "PULSION 12.1".
4. If pairing is successful the amplifier speaker will beep and indicator stops
flashing.
During playback, you can:
1. Press
the audio device.
2. Press or
Note:
 The operation range of Bluetooth is approximately 10 meters (30 feet). Any
obstacles in the path between devices may reduce this range.
 Only one Bluetooth device can be paired at a time.

. General operation

7
Connecting mains power
1. Connect the AC power plug to the power supply outlet.
2. Switch the power button to AC position, the power ON/OFF button is
located at the real panel of the device. Switch the power button to DC
position for battery use and OFF to power off the unit.
Standby mode
1. Press the STANDBY button on the remote to wake the unit from STANDBY
mode.
2. To enter STANDBY mode, press STANDBY button.
button to play or pause playback of the selected track on
to skip to last or next track.
Bluetooth button on remote control
- 28 -