Guardian Sensor 3 Guia Del Usuario página 11

WARNING: Never point a loaded serter toward any body part
where insertion is not desired. An accidental button-push may
cause the needle to inject the sensor in an undesired location,
causing minor injury.
10a
10b
10d
10e
10a. Hold the serter steady against
your cleaned insertion site,
without pushing the serter too
deeply into your skin.
Note: Failing to hold the serter
securely flat against your body during
insertion may let the serter spring
back after pressing the buttons, and
result in improper insertion of the
sensor.
10c
10d. Continue holding the serter flat
against your body for at least
five seconds to let the adhesive
stick to your skin.
10e. Slowly lift the serter away from
your body, making sure that the
buttons are not pressed.
- 9 -
10b-10c. Press and
release the bump
on both buttons at
the same time, while
holding the serter flat
against your body.