Performing A Blood Glucose Test - Fora TN'G Manual Del Propietário

Performing A Blood Glucose Test

1. Insert the test strip to turn on the meter
Wait for the meter to display
2. Select the appropriate measuring mode by pressing Main button
For selecting the measurement mode, please refer to "THE FOUR
MEASURING MODES .
.
3. Apply blood sample
Obtain a drop of blood of at least 0.5
µL with a lancing device. When the
symbol appears on the display, touch the
drop of blood with the absorbent hole of
the test strip. Do not rub the test strip
with your finger or try to apply a smeared
sample.
Gently apply the drop of blood to the
absorbent hole of the test strip at a tilted
angle. Confirmation window should be
completely filled if enough blood sample
has been applied. Do NOT remove your
finger until you hear a beep sound.
21