Waldbeck 10034153 Manual De Usuario página 68

EN
68
Cleaning the ash container of the exhaust air chamber
The ash container of the exhaust chamber is fixed on the rear bottom of the
combustion chamber.
• Remove the rear cover of the furnace.
• Remove the screws from the two covers of the exhaust air device.
• Remove the cold ash with an ash extractor.
• Make sure the gasket is tight before refitting the cover.
Empty and clean the
screw conveyor
Remove and clean the ash container
(see picture on the right).
Cleaning the smoke fan
To inspect and clean the smoke blower,
unscrew the four hexagonal screws of the
smoke blower, remove the blower slowly,
use a vacuum cleaner to remove ash in pipes
or blowers. Please ensure that the gasket is
tight and tight before reassembling.
Clean heat
exchanger tubes with
a brush
Remove and
clean plates
Remove
plate
Remove and
clean the ash
container