Display; Shift Setting; The Standby Control Function; Fault Indication - Conservator GRM183QW Manual De Instalación Y Operación

4.3 Display

◆ Once initially powered on， the display screen (including the key light) is on full display for 3s，
and then operates as the displayed middle shift.
◆ Normal operation display
In case of a failure，the appropriate LED light show in combination the failure code (in recycling
display)；
In case of no failures，the actual operation position of refrigerator will be on display.

4.4 Shift setting

Each time the shift setting key A is pressed once，the shift position changes one time. After the
shift setting has been completed, the refrigerator will operate according to the set value after 5s.
From left to right, the temperature is lower.
The shift regulation is：
Shift 1
4.5

The standby control function

When the fridge work, push the gear SET long SET 3 s (effective keys to loosen), refrigerator into
standby function mode, standby indicator lights lit, all loads stop work;
When freezer in standby, short press gear SET button SET, refrigerator into the normal working
state, standby indicator lights put out, return to normal working condition.

4.6 Fault indication

Display
The LED1 and LED2 lit
The LED1 and LED3 lit
The LED1 and LED4 lit

4.7 Temperature control operation

1. Initial setting of fresh compartment control panel is shift 3, for
frozen compartment air shutter, the initial setting is Mid position.
2. If the ambient temperature is lower than 10℃ in a long time, fresh
compartment control panel shall be placed in 4 or 5 position, frozen
compartment air shutter shall be placed in COLDER position.
3. If the ambient temperature is higher than 43℃ in a long time, fresh
compartment control panel shall be placed in 4 or 5 position, frozen
compartment air shutter shall be placed in Mid~COLDER position.
Tips: When the frozen compartment air shutter is placed in COLD position, the fresh
compartment can be rapid cooled, but if being placed in COLD position for a long time, the
temperature inside fresh compartment may be reduced to below 0℃.
Shift 2 Shift 3
Refrigerator temperature sensor circuit
Freezer defrost sensor
Ambient temperature sensor
15
Shift 4
Malfunction
Shift 5