Kohler K-13460 Manual De Instrucciones página 4

Supply
Hose
2. Connect the Supplies
Connect the supply hoses to the supply stops. Left is hot. Right is
cold.
Tighten the connections with an adjustable wrench.
3. Installation Checkout
Connect the drain tailpiece into the P-trap.
Using the key provided, remove the aerator from the spout.
If applicable, uncover the drain.
Turn on the main water supply and check for leaks. Adjust as
needed.
Allow the water to run through the spout for about one minute to
remove any debris. Check for leaks and adjust as needed.
Close the water supplies.
Using the key provided, reinstall the aerator to the spout.
Turn on the water supplies.
1102759-2-B
Supply
Faucet Aerator
Stop
4
Key
Kohler Co.