Electrodes Adjustment - Air Regulation Principle - baltur SPARK 3 Manual De Instrucciones

After having installed the nozzle, check the correct position of the electrodes and deflector according to
the following levels. It's adviseable to check levels after every intervention on head.
- Position the disc-electrodes unit on the nozzle-
carrying element as illustrated in the diagram.
- Tighten the unit via the screw "A".
- "B" position any pre-heater.
- Head adjustment is made by the screw (D), as for indication of index (C).
- Unscrew to open the airway between disc and head, screw down to close.
OIL BURNER SPARK 3 - 3SP
AIR REGULATION PRINCIPLE
DIAGRAM AND DISK-ELECTRODES SETTING
24
N° 0002932951
Rev. 15/09/99