Ec Declaration Of Conformity - Battipav Vip Manual De Instrucciones

Battipav srl
1) Loosen the register fixing nut with a 10 mm wrench;
2) Screw down the dowel with a 3 mm Allen key until the play is eliminated.
19 20
3) Lock the register again with the fixing nut.
CLEANING
DO NOT WASH THE MACHINE WITH HIGH PRESSURE WATER JETS
It is extremely easy to clean the VIP machine by loosening the locking nuts and dismantling the working
15 21 22
table. Through the tap located on the bottom of the recovery tank, remove any working residual from the
machine.
AFTER THE TANK CLEANING OPERATIONS, PLACE THE WORKING TABLE BACK IN POSITION, OBSERVING
THE DISTANCE FROM THE LEG SUPPORT.
Clean the sprayer regularly as indicated.
16 17
DISPOSAL
In the event of scrapping the entire machine, it must be disposed of in accordance with the methods laid
down by current legislation.
Main Casing
Submerged Pump
Electric Motor
R.A.E.E. 08020000002803
The European Directive 2012/19/EU arranges that in the event of scrapping of electrical equipment, they must not be disposed of city solid
refusals but collected separately, in order to optimize the level of recovery and recycling of the materials and above all in order to prevent
damages to health and environment. To comply with European Directive 2012/19/EU, all electrical equipments must be marked with
crossed basket symbol. The packing of the machine will be disposed of in accordance with the methods laid down by current legislation. For further
information concerning disposal of electrical equipment, please refer to public administration service.
TROUBLESHOOTING
HAVE YOUR TOOL REPAIRED BY A QUALIFIED PERSON
This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified
persons using original spare parts, otherwise this may result in considerable danger to the user.
Malfunctions not related to a conformity defect that exists at the time of purchase are excluded from the
warranty. Exclusions include:
• Wear of materials (taking into account the average life of the product)
• Failure to comply with the recommendations contained in this manual.
• Maintenance and tampering carried out by unauthorized personnel.
• Use of non-original spare parts.

EC DECLARATION OF CONFORMITY

BATTIPAV S.R.L. (Z.I.2 Via Cavatorta 6/1 - 48033 Cotignola (RA) ITALY Tel 0545 40696 - info@battipav.com -
www.battipav.com) Declares under your sole responsibility that the product:
Series: VIP
Art.: specified in table 1
Model: The VIP site cutter is a machine intended specifically for cutting ceramics, single-fired items, terracotta,
and marble, up to a thickness of 40 mm.
This Declaration relates to the following Directives
2006/42/EC (MD), 2014/35/EU (LVD), 2014/30/EU (EMC), 2011/65/EU (RoHS II)
Reference to harmonized standards:
EN12418:2000+A1:2009, EN61029-1:2009+A11:2010, EN60335-1:2012+A11:2014,
EN60335-2-41:2003+A1:2004+A2:2010, CEI EN 61000-6-1:2007, CEI EN61000-6-3:2007+A1:2013, CEI EN
61000-3-2:2015, CEI EN 61000-3-3:2014
Date of construction - Serial number (on the cover)
Polyamide Steel Alluminio Copper
General manager:
Claudio Tondini
GB
Epoxy Resin
29