Sharpening Knives - Hamilton Beach 75288 Manual De Instrucciones

840122100 ENv01 2/25/04 11:06 AM Page 4
Hints for Best Use
• The can opener will easily open all standard size cans.
• On some models it will be necessary to position can
opener at edge of counter, allowing for clearance to
open cans taller than the can opener.
• If there is a bump, dent, or heavy seam in rim of can, open
other end of can or start cutter just beyond it.
• Cans made with aluminum lids will not adhere to magnet.
• The motor of your can opener is permanently lubricated
and will require no oiling.
• To use cord storage on back of opener, push in or pull out
cord as needed.
Cleaning Your Can Opener
1. Unplug cord from electrical outlet.
2. Remove complete cutting assembly as
shown. Push piercing lever up and to
the left. It will pop out of a locked
position.
3. Wash cutting assembly in hot, soapy
water. Rinse and dry thoroughly.
4. Wipe body of can opener with damp
cloth. NEVER immerse the can opener
in water.
5. To reassemble, place knob on back of
cutting assembly into large end of
keyhole as shown. Push to the right
until it snaps into place.
4

Sharpening Knives

This feature on selected models.
1. Place cutting edge of knife in knife
slot located on back of can opener.
2. Draw knife blade through slot several
times.
NOTE: Serrated blades should never
be inserted into this unit.
5