Code Identification - Vivanco UR Zap 2 Manual De Instrucciones

2.3 Code Identification

You can identify the codes you have set at any time:
2.3.1 Select the appliance to be controlled using the TV or
SAT button.
2.3.2 Keep the On/Off PWR and Mute buttons pressed
simultaneously(!) until the lamp lights constantly.
2.3.3 Press the Ch- button briefly once.
2.3.4 Then count off the code. First press Vol
count the number of times the hundred blinks, then press Ch+
briefly and count the number of times the ten blinks and
finally, press Vol briefly the number of times the one blinks.
– No blink means 0. You can note the numbers on the back of
the battery compartment, e.g. for quick code entry after
replacing the batteries.
3 Operation
You operate the basic functions of your appliances in the same
way as if you were using the original remote controls. Select
device to be controlled by pressing TV or Sat button.
3.1 Comfort buttons
The Zap on One button (channel 1 button): Some appliances
can only be switched on with this button and not with the PWR
On/Off button. In addition, this button brings you back quickly
to Channel 1 if you are able to watch many channels and are
currently watching a channel with a long channel number. The
lower channel number settings are frequently the most
important channels.
Scan: When you press this button a channel-up signal CH+ is
emitted every 1,3 seconds and the following channels are
shown one after the other without your having to press a button
repeatedly. This function stops when you press any button and
ends automatically after 2 minutes.
Hotline
Should you have any questions regarding your remote control
you can call our UK telephone hotline: Tel. 01442 246088. –
Vivanco products are improved constantly. The code library in
particularly is updated continuously. If something is missing,
call us or send an e-mail to consumer@vivanco.co.uk. It is
quite possible that we already have a solution to your problem.
Please always indicate the brand and type of the appliances
you wish to control and which Vivanco control code you are
using. See also 2.3.
Specifications
Batteries: 2x AAA batteries
Range: max. 7 m
Not for 400 kHz
2-year works guarantee
Should your UR Zap 2 cease to work within 2 years of
purchasing you will receive a free replacement from Vivanco.
Exceptions: deliberate destruction and normal wear and tear of
the housing and buttons.
(D) Bedienungsanleitung
Fernbedienung UR Zap 2 für Fernsehgeräte,
Satellitenempfänger und Kabelboxen
1 Batterien einlegen
Bitte öffnen Sie die Batterieklappe an der Geräterückseite und
legen Sie 2 Alkali-Mikrozellenbatterien ein. Achten Sie auf die
angegebenen Polaritäten auf Batterien und im Batteriefach
(+=+), und schließen Sie das Fach wieder vorsichtig. – Bitte
achten Sie darauf, immer einwandfreie, gut geladene Batterien
zu verwenden.
2 Ger teanpassung
Um Ihre Ger te steuern zu können, müssen Sie die
Fernbedienung für Ihre Ger te einstellen. Dazu gibt es zwei
Möglichkeiten: die direkte Steuerkodeeingabe oder die
Kodesuche.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49 (0)4102
231235, Fax: +49(0)4102 231444, e-Mail: hotline@vivanco.de
briefly and
3