Kenwood KVT-819DVD Manual De Instalación página 8

Installation for Monitor/Player Unit
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Make sure that the unit is installed securely in place. If the unit is unstable,
it may malfunction (eg, the sound may skip).
Installation for Receiver Unit
1. Attach the installation brackets 9 to the sides of
the receiver unit using the sems bolts 7.
2. Use the tapping screw 8 to secure the receiver
unit to the audio board.
|
8
KVT-819DVD/KVT-839DVD
Firewall or metal support
Metal mounting strap
(commercially available)
Sems bolts (M4 × 8 mm)
(Accessory 7)
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.
Accessory 5
Tapping screw (ø4 × 16 mm)
(Accessory 8)
Installation brackets
(Accessory 9)