Leviton evr-green EVR30-B1C Guia De Instalacion página 10

Install Your Hardwired Charger
(continued)
3.
Wire.
a.
Remove compartment cover.
Model
EVR40-B2C
EVR30-B1C
EVR30-R2C
c.
Replace compartment cover and
torque to 8.7 in-lb (1.0 N-m).
Copper Wire Type
No. 6 AWG, 90°C
No. 8 AWG, 75 or 90°C
No. 8 AWG, 75 or 90°C
10
b.
Use a 1inch (MG32) conduit hub
and install. Crimp wire ferrules onto
copper wires before attaching to
terminal blocks. Torque to 19 in-lb
(2.2 N-m). Keep enough length of
wire to facilitate installation.
Wire Ferrule (Pressure
Terminal Connector)
K S Terminals, Inc. E16-12
K S Terminals, Inc. E10-12
d.
Replace front cover and secure it by
the bottom screw, torque to
10.4 in-lb (1.2 N-m).
Crimping Tool
K S Model: KST2000M
WAGO Model: Variocrimp 16