Ghibli & Wirbel Power Indust AX60 Z22 Uso Y Mantenimiento página 45

Never use the vacuum without filter.
Do not suck lighted cigarettes, cigarette stubs or incandescent materials. Do not collect gasoline, fuel or
other flammable liquids.
Ensure that all shields and protections are put in place and that all safety devices are available and efficient.
Do not wear loose clothes or accessories such as ties, scarves or torn clothes which may be caught or
sucked by the vacuum.
Do not open the collection container when the vacuum is working.
The "Operating and maintenance manual" must always be readily available for consultation, in order to be
able to ascertain the correct working procedures in case of doubts. Should this manual get lost or damaged,
please ask GHIBLI&WIRBEL Srl. for another copy.
Structural damages, modifications, improper changes or repair may affect the vacuum safety and therefore
annul the herein certification. Any modification required should be authorized and executed by
GHIBLI&WIRBEL engineers only.
During maintenance operations it will be necessary to affix a warning sign on the vacuum with the following
indication: "MAINTENANCE, DO NOT START THE MACHINE".
Do not get on the vacuum.
Do not touch wires, switches and switch-buttons with wet hands.
Before plugging the vacuum, ensure that power supply voltage and frequency meet the specifications
required and reported on the machine plate.
Connect the machine to an electrical system outlet with efficient earth.
In case it is necessary to use an extension, check that the extension is in perfect conditions, CE marked and
that the extension cable cross section area is suitable for the vacuum electrical input.
To recover the vacuum original working conditions after maintenance, the operators must check that the
machine protections, particularly safety devices and guards, have been put back in place ensuring safety
working conditions.
The vacuum must be operated by adults only.
Before executing vacuuming operations, always set on the vacuum wheel brake provided to ensure that the
vacuum position is stable.
ENGLISH - 12 -