Braun Oral-B PRO TRIZone OXYJET 1000 Smart Serie Manual Del Usuario página 13

a different sound while brushing. Periodically check
the operation of the pressure sensor by pressing
lightly on the brush head during use.
Brush heads
Oral-B offers you a variety of different brush heads
that fit your Oral-B toothbrush handle.
Our oscillating-rotating brush heads can be
used for tooth-by-tooth precision cleaning.
Oral-B CrossAction brush head
Our most advanced brush head. Angled
bristles for a precise clean. Lifts and
powers away plaque.
Oral-B FlossAction brush head
features micropulse bristles that allow
for an outstanding plaque removal in the
interdental areas.
Oral-B 3D White brush head
features a special polishing cup to
naturally whiten your teeth. Please note
that children under 12 years old should
not use the Oral-B «3D White» brush
head.
Oral-B Sensitive brush head
features an extra soft bristle structure
that is gentle on teeth and gums.
Oral-B PowerTip brush head
offers a deep clean in hard to reach
areas, e.g. around bridges, crowns or
implants.
Our sweeping «Trizone» brush head can be used
with all common brushing techniques.
Oral-B TriZone brush head
features triple zone cleaning action for
outstanding plaque removal, even in
between teeth.
Oral-B brush heads feature light blue INDICATOR
bristles to help you monitor brush head replace-
ment need. With thorough brushing, twice a day
for two minutes, the blue color will fade halfway
approximately within 3 months, indicating the need
to replace your brush head. If the bristles splay
before the color recedes, you may exert too much
pressure on teeth and gums.
We do not recommend using the Oral-B FlossAction
or Oral-B 3D White brush head with braces. You may
14
use the Oral-B Ortho brush head, specifically
designed to clean around braces and wires.
Connecting your toothbrush to your
Smart Phone
Download the Oral-B™ app for free from App Store
or Google Play™. The Oral-B™ app gives you the
opportunity to use your time more efficiently, chart
your brushing progress and customize your tooth-
brush settings (for more benefits see the Oral-B™
app instructions).
• Before using the Oral-B™ app make sure
Bluetooth is activated on your smart phone (for
directions please refer to your smart phone's
user manual). Your toothbrush will appear in the
list of devices as: «Oral-B toothbrush».
Note: Oral-B™ app functionality is limited if
Bluetooth is deactivated.
• Start the Oral-B™ app.
• Once you start using your toothbrush by lifting it
off the plugged-in charger base (1) or briefly
turning your toothbrush on and off (5), it auto-
matically connects to the Oral-B™ app.
• Any further app instructions will be displayed on
your smart phone.
• Keep your smart phone in close proximity when
using it with your toothbrush handle. Make sure
the smart phone is safely positioned in a dry
place.
Note: Your smart phone must support Bluetooth
4.0 (or higher) in order to connect to your tooth-
brush handle.
Cleaning recommendations
After brushing, rinse your brush head carefully
under running water for some seconds with the
handle switched on. Switch off the handle and
remove the brush head. Clean both parts separately
under running water (e); then wipe them dry before
reassembling the toothbrush. Put the toothbrush
handle back on the charger base. The charger base
should be cleaned with a damp cloth only.
B Using your irrigator
Before using the irrigator first time, fill the water
container (17) and allow the water to run through
completely by holding the irrigator handle (16) over
a washbasin.
®
• Attach one of the irrigator jets (10) to the handle
until it locks into place (f). Fill the water container
with lukewarm water. If you want to add mouth-
wash into the water, please make sure you fill the
water container with lukewarm water first, then
add the mouthwash (g).
• Turn on the irrigator by pressing the on/off switch
(13) (h). The handle switch should be in the lower
position = water stop.
(SM)