Product Maintenance - Fellowes Fortishred 4850C Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
ADVANCED PRODUCT FEATURES
SilentShred™ Technology
shreds without noisy disruptions
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
SHEET CAPACITY SENSOR
Eliminates frustrating jams by preventing overloads.
Electronically measures paper thickness to prevent
paper jams:
inserted. Automatic reverse of paper.
during shredding process.

PRODUCT MAINTENANCE

CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However,
on rare occasions the sensors may become blocked by paper dust causing the
motor to run even if there is no paper present
located in the center of the paper entry).
TO CLEAN THE SENSORS
1
2
Locate Auto-start
shredder
infrared sensor
TROUBLESHOOTING
Safety Shield Indicator: When flashing alternatively with On/Off ( )
Door Open Indicator: When flashing alternatively with On/Off ( )
Paper Capacity Indicator: When flashing blue, too much paper is inserted. Shredder will automatically stop and reverse paper. See Paper Jam section below.
R
Overheat Indicator: When flashing alternatively with On/Off ( )
PAPER JAM
2
1
Gently pull uncut paper
When flashing blue,
from paper entry.
too much paper is
inserted. Shredder
will automatically stop
and reverse paper.
Sheet Capacity Sensor
Helps prevent paper jams by
indicating sheet capacity levels
during the shredding process
(Note: two paper detection sensors are
3
4
Clean any contamination
to clean sensors. Make sure
from the paper sensors
brush is clean and dry
3
4
If necessary, press
Shred 1 sheet of
Reverse (R) to run
paper to clear
shredder in reverse and
cutters. Resume
then pull uncut paper
normal shredding.
from shredder.
Safety Shield
Electronically controlled shield
stops shredder when opened for
advanced safety
OILING SHREDDER
diminished sheet capacity, intrusive noise when shredding and could ultimately stop
empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1
2
*Apply oil
Set to Off ( )
across entry
*Only use a non-aerosol vegetable oil in long nozzle
container such as Fellowes 35250
( ) is blue, resume shredding.
Auto Shut Off
After 30 minutes of inactivity, shredder
automatically turns off for zero energy
consumption
3
seconds
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fortishred 4850s

Tabla de contenido