Korg TMR-50 Manual De Usuario página 31

will start when precount "–1" (1 beat
before) is displayed.
The metronome sound from the speaker
will stop shortly before recording will start.
To hear the metronome while recording, use
headphones connected to the PHONES jack.
Playing back the tempo-synchronized track
1.
With the recorder stopped, press the
button or the
select the tempo-synchronized track to
play back.
When a tempo-synchronized track is
selected, the tempo-synchronized track
icon will appear on the display.
The tempo and beat will be set to the tempo
and beat values that are stored as track data.
Note: The tempo and beat settings will
not change if you select a track that is not
tempo-synchronized.
After selecting a tempo-synchronized
button, and then
track, you can use the TEMPO UP/DOWN
buttons, the TAP button, and the BEAT UP/
DOWN buttons to change the tempo or
beat settings. If you want to return these
settings to the values that are stored as
track data, temporarily select a different
track number, and then re-select the tempo-
synchronized track.
2.
Press the PLAY/STOP button to play back
the tempo-synchronized track.
Playback will start 1 beat after the button
is pressed. "0:00" will continue to blink
on the time indicator of the display until
playback starts.
When playback of the tempo-synchronized
track starts, the metronome pendulum will
swing. In addition, the TAP TEMPO button
will blink in time with the tempo.
31