Using The Tuner And Metronome Simultaneously - Korg TMR-50 Manual De Usuario

The tap tempo can also be input while
the metronome is in use.
4.
Play according to the tempo.
5.
To stop the metronome, press the START/
STOP button.
Using the tuner and metronome
simultaneously
The TMR-50 lets you use the tuner and
metronome simultaneously.
For more details on tuner and metronome
operation, please refer to the "Using the
tuner" and "Using the metronome" section.
Using the tuner and metronome
simultaneously
For example, if you're playing along with the
metronome and notice that your instrument
is not tuned correctly, you can leave the
metronome running while you tune.
Proceed as follows.
1.
Press the METRONOME ON button.
2.
Press the START/STOP button to start
the metronome.
If necessary, specify the tempo and time
signature etc.
To set the tempo: TEMPO p, q buttons
or TAP TEMPO button
To set the time signature: BEAT p, q buttons
When using the tuner and metronome
simultaneously, you can't select "triplets,"
"triplets without the center beat,"
"quadruplets" or "quadruplets without
the center beats" as the time signature.
3.
Press the TUNER ON button to enter
Meter mode.
The display will show the tuning meter.
The tempo of the metronome tempo
is indicated by the blinking of the TAP
TEMPO button.
21