Service And Maintenance - ProMed tens 1000 s Manual De Instrucciones

T
ROUBLESHOOTING
If your TENS unit is not functioning correctly
1. Make sure that the battery is correctly inserted or replace the
battery. When inserting a battery, make sure that the polarity
is correct.
2. If the ON/OFF LED is flashing and there is no stimulation,
check that the leads are attached correctly and that the electro-
des are correctly positioned. If the unit seems to be functio-
ning, yet you still feel no stimulation, it is possible that the elec-
trodes or the leads need replacing.
3. If the battery is charged but the unit is not working, turn both
intensity controls 2 to the OFF position (counterclockwise) and
then slowly back to the ON position.
S M
ERVICE AND AINTENANCE

Service and maintenance

If you should experience other problems, consult your dealer,
returning the unit if necessary. Never attempt to repair a fault
yourself.
For repair or maintenance, send the
dealer to:
Promed GmbH Kosmetische Erzeugnisse
Lindenweg 11
D-82490 Farchant
Tel. +49 (0) 8821/9621-0
Fax +49 (0) 8821/9621-21
via your
tens 1000 s
47
DE
US
FR
IT
ES