Sunex Tools 6605B Instrucciones De Operación

SPECIFICATIONS:
Low Height ........................................................ 5-5/8"
Raised Height . ................................................. 22-3/8"
Length ................................................................... 55"
Chassis Width ................................................... 6-5/8"
Handle Length ....................................................... 40"
Saddle Diameter . ............................................... 6-5/8"
Shipping Wt. . ................................................. 220 Lbs.
ThIS OPERATINg mANUAl
cONTAINS ImPORTANT
SAFETY INFORmATION. READ
cAREFUllY AND UNDERSTAND
All INFORmATION bEFORE
OPERATINg TOOl. SAVE ThIS
mANUAl FOR FUTURE USE.
FOR YOUR SAFETY
AND TO PREVENT INJURY:
Use Service Jack for
Lifting Purposes ONLY.
Always Support Vehicle with
Jack Stands
6605B
6605B_manual_071107.indd 1
OPERATING INSTRUCTIONS
and
PARTS BREAKDOWN

INSPECTION:
Visual inspection should be made before each use of
the service jack, checking for leaking hydraulic fluid and
damaged, loose or missing parts. Each jack must be
inspected by a manufacturer's repair facility immediately,
if accidentally subjected to an abnormal load or shock.
Any jack which appears to be damaged in any way,
found to be badly worn, or operates abnormally MUST
BE REMOVED FROM SERVICE until necessary
repairs are made by a manufacturer's authorized repair
facility. It is recommended that an annual inspection of
the jack be made by a manufacturer's authorized repair
facility and that any defective parts, decals or warning
labels be replaced with manufacturer's specified parts.
A list of authorized repair facilities is available from the
manufacturer.
Study, underStand and follow all inStructionS
before operating thiS device.
do not exceed rated capacity.
uSe only on hard level SurfaceS.
thiS iS a lifting device only. immediately after
lifting, Support the vehicle with appropriate
meanS.
do not move or dolly the vehicle while on
the jack.
lift vehicle only in areaS Specified by the
vehicle manuafacturer.
no alterationS Shall be made to thiS product.
failure to heed theSe warningS may reSult in
perSonal injury and/or property damage.
MODEL 6605B
5 Ton Capacity
Hydraulic Service Jack
rev. 03/0/05
7/12/07 4:34:06 PM