Maintenance, Storage; Battery Charger - Mountfield BC 500 Li 48 Manual De Instrucciones

2.4 MAINTENANCE,
STORAGE
Ensure regular maintenance
and correct storage to
maintain machine safety and
high performance levels.
Maintenance
• Never use the machine with
worn or damaged parts.
Faulty or worn-out parts
must always be replaced
and never repaired.
• Be careful during adjustment
of the machine
entrapment of the fingers
between moving parts of
the cutting means and fixed
parts of the machine.
The noise and vibration
levels shown in these
instructions are the maximum
levels when using the machine.
The use of an unbalanced
cutting element, the excessive
speed of movement, or the
absence of maintenance have
a significant influence on noise
emissions and vibrations.
Consequently, it is necessary
to take preventive steps to
eliminate possible damage
due to high levels of noise and
stress from vibration; maintain
the machine well, wear ear
protection devices, and take
breaks while working.
Storage
• To reduce fire risks, do
not leave containers with
debris inside a room.
to prevent
2.5 BATTERY / BATTERY
CHARGER
IMPORTANT The following
safety instructions are in addition
to the safety requirements
provided in the specific battery
and battery charger manual
delivered with this machine.
• Only use battery chargers
recommended by the
manufacturer to recharge
batteries. An inadequate
battery charger may cause
electric shock, overheating
or corrosive liquid to
leak from the battery.
• Use only batteries specifically
designed for your power tool.
The use of other batteries may
cause injuries and fire risks.
• Make sure that the machine
is switched off before inserting
the battery. Inserting a
battery in a machine which is
switched on can cause a fire.
• Keep all unused batteries at
a distance from paper clips,
coins, keys, nails, screws
or other small metal objects
as contact with the same
can cause short circuits.
Short circuits between
battery contacts can lead
to explosion or fires.
• Never use the battery
charger in environments in
the presence of vapours,
flammable substances or on
easily flammable surfaces
such as paper, fabric,
etc. The battery charger
heats up during recharging
and may cause a fire.
EN - 5