Information About The Operating Instructions; Intended Use; Conformity; Representation And Layout Of Warning Instructions - HellermannTyton CHG900 Manual De Instrucciones

Information about the operating instructions

1 Information about the operating instructions
These operating instructions only apply for the gas hot air blower CHG900 and are intended for
the user. Please read these operating instructions carefully and ensure that they are understood by
any person using the application tool.
Within this document you will find images illustrating best practice guidelines for operating and
maintaining the application tools, along with contact details for your local HellermannTyton
country representative.

2 Intended use

The gas hot air blower CHG900 is used to shrink heat-shrinkable products of all types, as well as
for soft soldering, forming plastic, and defrosting.
Using gas cartridges that are not suitable or modifying the gas hot air blower is considered
non-intended use.
We are not liable for any damage and claims arising from the improper operation or use of the
cable tie installation tool, nor are we responsible for any damages caused by defects resulting from
inappropriate or unsuitable use of the tool, incorrect or careless treatment, normal wear and tear
as well as any modifications made to the tool by the customer of a third party.
The warranty/repair by HellermannTyton does not include the rectification of faults that result from
force majeure, external influences, customer neglect (e.g., modifications or attachments,
application errors etc.) or the influence of third parties. The replacement of wear parts or spare
parts during or after maintenance work carried out according to the operating instructions is also
not included.
The gas hot air blower must only be used in faultless condition.

2 .1 Conformity

The device fulfills the requirements in accordance with:
• DIN EN 521

3 Representation and layout of warning instructions

The hazard level with the associated warning symbol and explanation are illustrated below:
WARNING
Possible risk of lethal or serious injuries.
NOTE
Texts with this symbol indicate situations that can lead to damage to the tool if not observed.

4 Initial operation

The application tool can be used immediately.
f Take the application tool out of the packaging and check it for damage. If damaged, inform the
supplier in writing immediately.
4
Operating instructions • CHG900 • 03-2021 • 391-90010