Epson BRIGHTLINK PRO 1460U Guia De Instalacion página 26

c
If there are any obstacles such as a frame or tray at the bottom of the screen, touch operations will
not operate correctly. Stick the supplied infrared deflectors along the locations of the obstacles
( p.52). Make sure there is a space of approximately 20 mm between the place where the infrared
s
deflector is stuck and the bottom of the projected image.
When installing the Touch Unit on the whiteboard (without using the Touch Unit Bracket)
You need to leave at least 120 mm distance between the top edge of the projected image and the top edge
of the actual screen.
25
Installation Guide
[Unit: mm]