Calibrating The Pen - Epson BRIGHTLINK PRO 1460U Guia De Instalacion

Installation Guide
c
Select Arc Correction
d
Select Arc Correction
e
Select the side you want to correct
f
Correct the selected side
If the message "Cannot adjust any further."is displayed while adjusting, you cannot adjust the shape
any further in the direction indicated by the gray triangle.
g
Repeat steps 5 and 6 as needed to adjust any remaining sides

Calibrating the pen

Check that adjusting the position of the projector is complete before you start calibrating the interactive pen.
"Adjusting the Position of the Projector"
s
p.46
54