Connecting Your Directv ® Hd Receiver - Samsung SIR-TS360 Manual Del Propietário

Receptor hd directv
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3
3
CHAPTER 3
Setting up and connecting
Coaxial digital audio jack and cable (cable not included)
Coaxial digital audio jacks and cables send digital audio
data to A/V receivers equipped with coaxial digital audio
input jacks.
VCR control jack and cable
The VCR control jack and cable allow your DIRECTV
HD Receiver to send signals to your VCR's remote
sensor, giving you the ability to program your VCR to
tape programs for you using simple on-screen controls.
Audio/Video input jacks and cables (RCA-type)
Use these jacks and cables to connect your receiver to a
TV, VCR, DVD, or to other components such as a stereo
receiver or amplifier.
The Video input jacks provide a high quality composite
video signal using RCA-type cables.
Audio jacks can be used to connect the DIRECTV
Receiver to an A/V receiver.
The audio/video input jacks on the back of the receiver
and the audio/video cable connectors are color coded
(yellow for video, red for right audio, and white for left
audio). Receivable resolution modes are 480p/i.
30
®
®
HD
3
3
CHAPTER 3
Setting up and connecting
Connecting your DIRECTV
®
HD Receiver
Make sure your TV, A/V receiver, and DIRECTV
1
If you plan to use the DIRECTV
®
HD Receiver to watch DIRECTV
2
RG-6 coaxial cable running from your satellite dish to the SATELLITE IN jack on the back of
your DIRECTV
®
HD Receiver.
If you plan to watch cable TV programming, connect the coaxial cable running from your
3
cable TV system to the CABLE IN jack on the back of the DIRECTV
If you plan to watch off-air TV programming (analog or digital), connect the coaxial cable
4
running from your off-air TV antenna to the AIR IN jack on the back of the DIRECTV
Definition Receiver.
Connect the supplied phone cord to a telephone wall jack and to the TEL LINE jack on the
5
back of the DIRECTV
®
HD Receiver.
NOTE
A triple LNB multi-satellite dish antenna including a Sat C LNB is required to receive HD
programming from DIRECTV.
Make video connections to your TV.
6
Your DIRECTV
®
HD Receiver supports the following kinds of video connections:
DVI
RGB
component (Y, P
, P
)
B
R
S-Video
composite (standard A/V jacks)
®
HD Receiver are turned off and unplugged.
®
programming, connect the
HD Receiver.
®
®
High-
31

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido