Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1. Select the installation area and mount the camera
base onto the wall or ceiling with 3 attached
screws.
2. Connect the power cable for camera.
3. Adjust the monitoring direction of the camera to make it face the monitoring area.
4. Mount the protective cover of the camera and the main body on the wall bracket, as shown in
the picture.
Pay attention to the assembly direction. The gap direction of wall bracket faces the monitoring direction.
J
It is suggested that not to touch the lens during installation, as the camera lens focus has been adjusted
correctly in the final manufacturing process. If you touch the lens, the lens may be stained and fail to be
focused.
4_ English
Publicidad
Tabla de contenido
