Installation Procedure - AirLive HP-3000E Guía De Instalación Rápida

Buttons
Security Click this button to connect the device to
Button the Powerline network.
Please refer to Security Button section for
more details.
LAN Port Use standard LAN cables (RJ45
connectors) to connect the device to the
port.
Reset This button is used to clear ALL data and
Button restore ALL settings to the factory default
values.
HP-3000E

Installation Procedure

1. Connect a standard LAN cable from the
200Mbps Powerline Ethernet Adapter's
Ethernet port to your PC.
2. Plug the 200Mbps Powerline Ethernet
Adapter into a normal AC power point.
3. Wait a few seconds for startup to be
completed, and then check the LEDs
English
4