AirLive HP-3000E Guía De Instalación Rápida página 7

•
The Power LED should be ON.
•
The PLC Link LED will be ON if other
Powerline devices are detected, otherwise it
will be OFF.
•
The Ethernet LED should be ON.
4. Insert the supplied CD-ROM into your Windows
PC, and wait for it to start. If it does not start
automatically, locate and run SETUP.EXE.
5. Follow the prompts to install the HP3000E Setup
utility.
6. Microsoft .NET Framework 1.1 is needed for
installing HP3000E Setup utility. The wizard will
check automatically whether the Microsoft .NET
Framework 1.1 was installed on your PC or not.
If not, the wizard will pop up a message box.
Click OK to install Microsoft .NET Framework
1.1 first.
HP-3000E
7. Once installation is completed, run HP3000E
utility program. The first screen (Network Tab)
will display information of the compatible
devices found.
Choose the desired device from the Device
Selection, and the information of the selected
device will be displayed in the Network
Topology table.
8. The 200Mbps Powerline Ethernet Adapter
is now ready for use.
English
5