Setting up a Home Network - Router Mode
1. Extend the antennas.
Position the antennas for the best Wi-Fi performances.
2. Prepare your modem.
Unplug your modem's power supply. Remove the battery if your modem has a
backup battery.
3. Connect your modem.
Connect the modem to your router's WAN port using a network cable. Put the backup
battery back and replug your modem to a power outlet.
4. Power ON the router.
Both 2.4GHz and 5GHz LED lights are on when the router is ready.
5. Connect a computer.
Connect a computer to the network wired or wirelessly.
You can set up your wireless router via wired or wireless connection:
Wired: Connect the network cable (3) from your modem to the blue Ethernet port on your
router . Connect another network cable (2) from your computer to the yellow Ethernet port
on your router.
na10334_rt_ac1200_qsg_aci.indb 3
RT-AC1200
1
WAN
Modem
4
LAN
2
3
3
2015/6/9 16:40:47