Haier ESD200 Manual Del Usuario página 21

Ocultar thumbs Ver también para ESD200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ESD200-MANUAL
1/10/03
English
Pouring Dishwasher Detergent:
Use the recommended amount of detergent for your wash loads. Measure and pour
the detergent into the large compartment for the main wash. The detergent for the
pre-wash goes into the small compartment next to the main wash compartment.
Note: For the pre-wash you should use one-half the amount of detergent that you
use for the main wash.
• We recommend that you use a Rinse Agent to help remove spots and prevent
new film build-up on your dishes, glasses, flatware, cookware and plastic.
main wash
detergent compartment
Note: Use only a liquid form of rinse agent in the dispenser.
Pouring Liquid Rinse Agent into the Dispenser:
Use the recommended amount of rinse agent for your wash loads. The rinse agent
dispenser is located next to the detergent dispenser. During the wash cycle, it
automatically releases a preset amount of rinse agent during the last rinse cycle.
When the dispenser is full, the see through rinse agent level indicator will be dark.
When it is empty, it will be clear which means you need to pour in more.
rinse agent
level indicator
Note: A full dispenser should last approximately one month.
If you want to adjust the amount of rinse agent dispensed, the
dispenser has 1 to 6 levels that you can adjust to. Simply rotate
the dial to your desire settings.
19
11:29 AM
Page 21
compartment door lever
prewash detergent compartment
detergent compartment lid
rinse agent compartment
(at this time you
should refill to
eliminate spotting)
Full
3/4 Full
1/2 Full
1/4 Full
Empty

Publicidad

Tabla de contenido
loading

Tabla de contenido