Using Your Dishwasher - Haier ESD200 Manual Del Usuario

ESD200-MANUAL 1/10/03
English

Using Your Dishwasher

Understanding the Dishwasher Control Panel:
Power Button:
• Press "POWER" button "In" to turn the power "ON".
• Press this button again to turn the power "OFF".
Note: You will see the "Power On Indicator Light" lit when the unit is on.
Select Button:
• Press "SELECT" button to select your desired option: Hi-Temp
Wash, Heated Dry or Upper Wash. Selected option(s) indicator
light(s) will be blinking at the start of the wash program.
Delay Button:
• Press "DELAY" button if you want to delay the starting time for a
wash program. You can delay the starting time for a wash
program from 1-9 hours.
Time Delay Display (LCD):
• The timer display which is located next to the delay button shows the number of
hours the starting time for a wash program is delayed. Once the delay timer is
set, the set time will start blinking in the LCD.
Door Latch:
• To lock the door, push the door with light
force until you hear the "Click."
• To unlock the door, squeeze the door latch
and pull towards you.
Note: DO NOT open the dishwasher door right away because the moist hot air
still may be present inside the tub and cause harm.
Wash Program Buttons:
• There are four wash programs that you can
select from: Pots & Pans, Normal Wash, Light
Wash, and Rinse & Hold. Simply press wash program button based on the load
and soil type. The selected wash program indicator light will be blinking at the
start of the wash program.
7
11:29 AM Page 9