Conceptronic CSATAI23U Guía De Instalación Rápida página 9

ENGLISH
4. Connecting the CSATAI23U
Note: For Connection Examples, see "Appendix A" at the end of the manual.
A. Connect the CSATAI23U to your storage device:
• For 2.5" or 3.5" SATA Devices: Use the SATA Connector (1)
• For 2.5" IDE Devices:
• For 3.5" & 5.25" IDE Devices: Use the 3.5" IDE Connector (3)
Note: When connecting a 5.25" IDE device or an IDE and SATA device together, use
the IDE extension cable for the IDE device.
Without the extension cable you cannot connect both devices correctly.
B. Connect the Power Supply to the CSATAI23U:
• For SATA Devices and 2.5" IDE devices: Connect the Power Supply directly to the
CSATAI23U
• For 3.5" & 5.25" IDE devices: Use the Power Splitter to provide power to the
CSATAI23U and the IDE device.
C. Turn on the Power Supply with the power switch
in the cable.
D. Connect the USB Cable to the CSATAI23U and a
free USB Port on your computer.
E. Turn on your computer.
Windows 2000 & XP will automatically recognize the device. No driver installation is
required to operate the CSATAI23U.
Note: If you connect a new HDD, it does not appear in "My Computer". You need to
create a partition on the HDD first before it will be visible. View the
"Partition Creation Manual" on the CD-ROM for instructions.
Use the 2.5" IDE Connector (2)
9