Weekly Timer Function - Ducasa M-59 Manual De Instalación Y Funcionamiento

3. When the air temperature drops 2 degrees below the set temperature, the
heater will start heating with "I/W" (1000W).
4. When the air temperature drops 4 degrees below the set temperature, the
heater will start heating with "II/H" (2000W).
5. When the air temperature is 1 degree higher or ≤ than the set temperature,
the heater will blow cold air.
5.

Weekly Timer FUNCTION

1. Turn the appliance on in working conditions (fan, warm, hot all work
correctly).This function is only available by using the remote control.
2. WEEK Press " "button once, "I/W" and "W-Timer" light up, "1" means
"Monday".
HOUR Press " " button twice, "II/H" lights up, "
two buttons set the hours
from 01—00 (01= 1 o'clock, 02=2 o'clock... 00= 24 o'clock, etc.)
MINUTE Press " " button three times, "Fan/M" lights up, "
two buttons
set the minutes from 00—59 (01= 1 minute, 02= 2 minute, etc.) This is the "on"
time
HOUR Press " " button four times, "II/H" lights up, "
two buttons set the
hours from 01—00 (01=1 o'clock, 02= 2 o'clock... 00= 24 o'clock, etc.)
MINUTE Press " " button five times, "Fan/M" lights up, "
two buttons set
the minutes from 00—59 (01= 1 minute, 02= 2 minutes, etc.) This is "off" time
With this, the timer for Monday is set.
3. Press " " button once more, "I/W" lights up, "2" means "Tuesday". Follow the
instructions as for Monday to set the "on" and "off" times.
4. When 1-7 (1= Monday, 2= Tuesday... 7= Sunday, etc.) are all set, press " "
button on the remote control seven times to set the temperature for Monday to
Sunday and press "
two buttons, select the desired temperature from 10℃
to 49℃.
PS: When you set today's temperature in the week timer function, the thermostat
function will start as with point 4) THERMOSTAT INSTRUCTIONS.
You can set different "on" and "off" times and temperatures for a whole week.
16