Window Open Function; Delay Function - Ducasa M-59 Manual De Instalación Y Funcionamiento

6.

Window Open Function

1. Turn the appliance on in working conditions (fan, warm, hot all work correctly).
This function is only available by using the remote control.
2. Press " " button, the "AUTO" light turns on. The appliance is working as a
smart energy-saving model. (In this function, the appliance checks and records
the local environment temperature. It will stop working when the appliance
registers the ambient temperature has dropped ≧3 ℃. The user should restart the
appliance with the "ON/OFF" button).
3. Press " " button again, the "AUTO" light turns off. Window Open Function is
off.
7.

Delay Function

This function can be used to set the "on" and "off" time:
The appliance is on standby.
Before the appliance is working.
This function is only available by using the remote control.
2. Press " " button light on the LED display, then press "
"Delay" light and "I/W" light turns on. Press "
from 01—24 (01= 1 o'clock, 24= 24 o'clock... 00=off, etc.) This is the "on" time.
3. Press " " button again, the "Delay" light and "II/H" light turns on. Press
" two buttons set the hours from 01—24 (01= 1 o'clock, 24= 24 o'clock...
00= off, etc.) This is the "off" time.
PS: Press " " button, a flashing number is displayed for 5 seconds before the
appliance returns to standby.
(This is a one-time function and must be reset after the power is cut off.)
" button once, the
" two buttons set the hours
17