Fein AFSC18Q Serie Manual Del Usuario página 10

OBJ_BUCH-0000000363-001.book Page 10 Wednesday, January 30, 2019 10:02 AM
en
10
Intended use of the power tool:
hand-guided power tool for use in weather-
protected environments without water sup-
ply, using the application tools and accessories
recommended by FEIN:
Automotive
– for cutting polyurethane beads for glazier
work in automobiles, trucks and busses
– for sawing out chassis sections and remov-
ing underseal materials
– for sanding of chassis parts
Symbols.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Man-
ual and the General Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving
back and forth.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by unin-
tentional starting of the power tool.
Use eye protection during operation.
Wear hearing protection while working.
Use a dust mask during operation.
General prohibition sign. This action is prohibited.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g.
against continuous intense sunlight.
Observe the notes in the text aside!
Switching on
Switching off
Confirms the conformity of the power tool with the guidelines of the
European Community.
Construction
– for sawing wood, plastic, glass-fiber rein-
forced plastics (GFRP) and for sawing sheet
metal (max. 1 mm)
– for removing tile joints and rasping or
scraping off tile grout or carpet remainders
– for sanding or rasping of smaller surfaces