Safety Instructions - Abicor Binzel ABITIG GRIP 260 Instructivo De Servicio

3 Safety Instructions

Typ Type of
cooling
®
ABITIG GRIP
2
150 air
200 air
260W liquid
260W SC liquid
450W liquid
450W SC liquid
500W liquid
Tab. 3
Product-specific torch data (EN 60 974-7)
1 According to EN 60 974-7 the value for alternating current (AC) must be given at 70% of the
tested direct current value (DC)
2 With long gas nozzle 36 mm
®
ABITIG GRIP 260
®
ABITIG GRIP 450
Tab. 4 Required cooling unit capacity
3 Safety Instructions
3.1 Classification
EN - 4
Load ED
1
DC AC
A A %
150 105 35
200 140 35
260 185 100
340 240 100
400 280 100
450 320 100
500 350 100
min. 800 W
min. 800 W
Observe the enclosed document Safety Instructions.
The warning signs used in the operating instructions are divided into four
different levels and are shown prior to specific work steps. Arranged in
descending order of importance, they have the following meaning:
DANGER
Describes imminent threatening danger. If not avoided, it will result in fatal or
extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, it may result in
serious injuries.
Electrode Gas
ø
flow
max. Max.
lenght supply
175 mm temp.
mm l/min °C
1.0 - 2.4 5 - 12
1.6 - 4.0 7 - 18
1.0 - 3.2 7 - 18 50
1.0 - 3,2 7 - 18 50
1.6 - 4.8 7 - 20 50
1.6 - 4.8 7 - 20 50
1.6 - 6.4 7 - 22 50
TIG welding torch
Cooling Torch inlet
pressure
Min. min. max.
flow
l/min bar bar
0.7 2.5 3.5
0.7 2.5 3.5
0.7 2.5 3.5
0.7 2.5 3.5
0.7 2.5 3.5