Technical Data - Abicor Binzel ABITIG GRIP 260 Instructivo De Servicio

TIG welding torch
1 Identification

2 Technical Data

Welding
Transport and storage
Relative humidity
Tab. 1 Ambient conditions
Type of voltage
DC polarity of the electrodes
Type of use
Voltage limitation
Max. arc inflammability and stabilization
voltage Breakdown voltage 50 Hz
Protection type of the machine side
connections
Shielding gas
Electrode
Tab. 2 General torch data (EN 60 974-7)
The manual welding torches ABITIG
inert gas welding using tungsten electrodes and inert gases. They are available
as liquid-cooled or air-cooled version.The liquid-cooled model requires a
recirculating cooling unit. They consist of the torch neck with equipment parts
and wearing parts, handle and cable assembly with central connector. They
correspond to the directive EN 60 974-7 and are not considered to be devices
having their own functions. Arc welding can only be carried out in connection
with a welding power supply.
®
GRIP are used in industry and trade for
- 10 °C to + 40 °C
- 25 °C to + 55 °C
up to 90 % at 20 °C
DC or AC
Usually negative
Hand-held
113 V peak value
10 kV
IP3X (EN 60 529)
as per DIN EN ISO 14175
commercially available tungsten electrodes
suitable for TIG use, preferably low-radiation
1 Identification
EN - 3