Preparation For Cutting - EGO HTA2000 Manual Del Operador

WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
could result in objects being thrown into your eyes and other possible serious injuries.
WARNING:
tool before servicing, cleaning, changing attachments or removing material from the
unit.
Before each use, inspect the entire product for damaged, missing, or loose parts such
as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced.
APPLICATIONS
You may use this product for trimming hedges, shrubs, scrub, bushes and similar
material with a branch diameter of less than 1 inch.
USING THE HEDGE TRIMMER WITH POWER HEAD
WARNING:
Do not wear loose clothing or jewelry. Wear eye and ear/hearing protection. Wear heavy,
long pants, boots, and gloves. Do not wear short pants or sandals or go barefoot.

PREPARATION FOR CUTTING

Refer to "SAFETY INSTRUCTIONS" earlier in this manual for appropriate safety
equipment.
1. Adjust the cutting blade to the desired working position.
2. Remove the blade guard from the blade.
Do not allow familiarity with this product to make you careless.
Always wear eye protection comply with ANSI Z87.1. Failure to do so
To prevent serious personal injury, remove the battery pack from the
Dress properly to reduce the risk of injury when operating this tool.
HEDGE TRIMMER ATTACHMENT—HTA2000
21