Step 2: Connect Your Sd Source - Slingbox PRO-HD Guia Del Usuario

AUDIO :
Analogue audio connectors are usually red and white. To connect
using analogue audio, use the included stereo audio and video
cable. The red connector is for the right audio channel, and white
is for the left audio channel. These sockets are located next to the
orange digital audio input. Insert one end of these audio cables
into the sockets labelled IN on your Slingbox PRO-HD. These
sockets are also in the top row on the back of your Slingbox.
Insert the other end into the audio output sockets on your A/V
source. These sockets are typically labelled AUDIO OUT.
TIP : If your HD source has digital audio, connect it for
better sound. Digital audio connections are usually
orange. These connections are also called S/PDIF
(Sony/Philips Digital Interface) audio. Connect one end
of the S/PDIF audio cable (sold separately) to the orange
socket labelled IN on your Slingbox PRO - HD. Connect
the other end to the output S/PDIF audio socket on your
A / V source. These audio sockets are typically labelled
DIGITAL AUDIO OUT or S/PDIF OUT.
6
STEP 2 : CONNECT YOUR SD SOURCE
VIDEO :
If you have an SD (standard defi nition) A/V device, you can
connect it to your Slingbox using the included composite
cables or SCART adaptor. Composite cables have a yellow
connector for video, along with red and white connectors for
audio. Insert the yellow connector into the yellow composite
socket labelled IN on your Slingbox PRO-HD. This socket is in
the top row on the back of your Slingbox. Connect the other
end of this video cable to the yellow video output socket on
your SD video source.
If your SD A/V source is already connected to your TV with
composite cables, disconnect them from the TV and then
re-connect these cables to the composite IN sockets on your
Slingbox. Use the matching cable set included with your
Slingbox to connect to the composite OUT sockets on the back
of your Slingbox, and then to the IN sockets on your TV.
7