BrushCleaning - Panasonic ER‑GN30 Manual De Operación

. With the power switch still
. Wipe off the water with a towel or

Brushcleaning

1. Make sure the power switch is in
. Remove the blade, and lightly
3. Attach the blade.

ER-GN30_AM.indb 8
set to the "1" position, place
the tip of the blade into
water and rinse thoroughly.
•
Water will jet out from the
rear side of the appliance,
so point it downward in
order to not wet the
surroundings.
4
▼
similar, and let it dry naturally.
•
It will dry faster with the blade
removed.
the "0" position.
brush off the trimmings on the
inner blade and outer blade using
the cleaning brush.
. Rinse under running water.
4
▼
2014/12/08 17:55:24