READ ALL INSTRUCTIONS BEFORE USING THE HEATER
1) The grill of the heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use handles when moving
this heater. Keep combustible materials such as furniture, pillows,
bedding, papers, clothes and curtains at least 3 feet (0.9m) from the
front of the heater and keep them away from the sides and the rear.
2) Extreme caution is necessary when any heater is used by or near
children or invalids and whenever the heater is left operating and
unattended.
3) Always unplug heater when not in use.
4) Do not operate any heater with a damaged cord, plug or after the heater
malfunctions, has been dropped or damaged in any manner. Return
heater to authorized service facility for examination, electrical or
mechanical adjustment, or repair.
5) Do not use the heater outdoors or for heating construction sites.
6) The heater is not intended for use in bathrooms, laundry areas and
similar indoor locations, areas with standing water, a shower or
swimming pool. Never locate heater where it may fall into a bathtub
or other water container.
7) Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Arrange cord away from traffic area and
where it will not be tripped over.
8) To disconnect heater, turn controls to off, then remove plug from
outlet.
9) Do not plug heater into any other cord connected device such as a
power strip, surge protector, multiple outlet adapter, grounding adapter
or outlet-type air fresheners. Plug into a 3-prong 110v 15amp or higher
grounded circuit receptacle only.
10) Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock or fire, or damage the heater.
11) To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings may
become blocked.
12) Do not block the front or rear of the heater.
13) Do not place anything directly in front of the heater.
14) Do not force the filter to dry using alternative methods when performing
filter maintenance; doing so could damage the filter.
Important Instructions
2