Bycool SCANIA COMPACT 3.0 Instrucciones De Montaje página 17

COMPACT 3.0
Position the front on the front studs with (1)
12
M6 wide-flanged washer and (1) M6 nut on
each stud. Tighten the nuts until the channelling
equipment comes into contact with the upper
foam in the unit.
Important: The rubber ductings should
come to a stop against the foam rubber in
order to prevent leakages of air.
Ø 6 flat washer
Original
edgeband
Cabin roof
Upholstery
Original screw
13 Tighten nut mentiones under point 9 until it
touches upper surface of front.
14
Present console and centre Compact until
original screws coincide with their original
position.
Ø 20 x Ø 7 x 3 rubber washer
9
A
M6 nut
M6 nut
M6 stud
Console
Air conditioning for vehicles
12
EPDM joint
Adjust canalisation systems against base joint
Rubber ductings
14
17
EN
Diagram A
Front