Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Parameter
Parameter value
description
Product name
Pneumatic grease dispenser
Model
PRO-G
PRO-G
PRO-G
12
12M
20
Tank volumetric
12
20
capacity [l]
Output pressure
240~
300~
[bar]
320
400
Working pressure
6~8
[bar]
Capacity of the
0,75
0,85
0,85
grease pump [l/
min]
Degree of
40:1
50:1
compression
Dimensions [mm]
315x
310x
430x
340x
340x
430x
780
810
776
Weight [kg]
11,95
14
12,8
1. General description
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
using
state-of-the-art
technologies
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. Taking
into account technological progress and noise reduction
opportunities, the device was designed to reduce noise
emission risks to the minimum.
Legend
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
Use ear protection. Exposure to loud noise may
result in hearing loss.
Wear protective goggles.
Wear protective gloves.
12
U S E R M A N U A L
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. Usage safety
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
Whenever "device" or "product" are used in the warnings
and instructions, it shall mean Pneumatic grease dispenser.
Do not cover air inlets / outlets. When in use, do not put
your hands or other items inside the device! Do not exceed
the maximum permissible operating pressure.
2.1 Safety at the workplace
a)
Make sure the workplace is orderly and well
lit. A messy or poorly lit workplace may lead to
accidents. Try to anticipate what may happen,
observe what is going on and use common sense
when working with the device.
b)
Do not use the device in an explosion hazard zone,
for example in the presence of flammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
c)
Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
and
device. Do not attempt any repairs independently!
f)
Children or unauthorised persons are forbidden
from entering a work station. (A distraction may
result in a loss of control over the device).
g)
Connecting and disconnecting the pressure line
should be done with the air valve closed.
h)
Do not direct the pressure line towards yourself or
toward other people or animals.
i)
Do not cut off the supply of compressed air by
crushing or bending pressure hoses.
j)
When starting to work with the device, it is necessary
to gradually increase the air supply to the device
in order to ensure that it is functioning properly.
In case of noticing any abnormal operation of the
device it is necessary to immediately disconnect
it from the compressed air and to contact the
manufacturer's service point
REMEMBER! When using the device, protect children
and other bystanders.
2.2 Personal safety
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
c)
Use personal protection equipment as required
for working with the device, specified in section 1
(Legend). The use of correct, approved personal
Rev. 20.06.2018
protection equipment reduces the risk of suffering
an injury.
d)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
e)
Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
f)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
g)
Compressed air may cause serious injury
h)
It is recommended to use eye, ear and respiratory
protection.
2.3 Safe device use
a)
Do not overload the device. Use appropriate tools
for the given task. A correctly selected device will
perform the task for which it was designed better
and in a safer manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and have to be repaired.
c)
It is necessary to disconnect the pressure line
before commencing any adjustment, accessories
replacement or after finishing work with the device.
Such a preventive measure reduces the risk of an
accident.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
i)
When transporting and handling the device between
the warehouse and the destination, take into account
the occupational health and safety principles for
manual transport operations which apply in the
country where the device will be used.
j)
Avoid situations where the device halts during
use due to excessive loading. This may result in
overheating of the drive elements and device
damage.
k)
Use air to supply the device, it is forbidden to use
other gases.
l)
Clean the device regularly to avoid a durable
encrustation of dirt
m)
At locations where there is a high risk of mechanical
damage use a reinforced hose for compressed air
connections.
n)
Before each use ensure the nozzle is correctly
Rev. 20.06.2018
mounted in the device and that the hose is correctly
attached and undamaged.
o)
The air supplied to the device should be dried, clean
and free from contamination.
Contamination can clog the conduits and lead to
damage to the device and its components.
p)
It is not allowed to carry or hang the device by the
pressure line.
q)
Do not touch any moving parts or accessories
unless the device has been disconnected from the
compressed air supply.
r)
In case of noticing a leak from the device or hoses,
it is necessary to immediately disconnect the
compressed air supply and eliminate the defects.
s)
Do not exceed the recommended supply pressure as
this may damage the device.
3. Use guidelines
Pneumatic grease dispenser is a device designed for
lubricating elements with a lubricating substance under
pressure.
The user is liable for any damage resulting from
nonintended use of the device
3.1 Device description
PRO-G 12
4
3
5
12
2
6
7
14
1
8
9
13
10
11
PRO-G 12M
3
7
4
2
5
1
12
6
13
14
8
9
11
10
13
Publicidad
