Konica Minolta PagePro 1300W Guia De Instalacion página 4

15
USB
Parallel
1. Connect your PagePro 1300W/PagePro
1350W to your PC by means of an interface
cable (parallel or USB). In case the 'Found
New Hardware' (Win2000/XP) or the 'Add
New Hardware' wizard (Win98/Me) on your
PC shows up, cancel it.
CAUTION
Do not use the 'Found New Hardware' or
'Add New Hardware' wizard to install the
PagePro 1300W/PagePro 1350W driver and
utilities.
2. Insert the PagePro 1300W/PagePro 1350W
Utilities & Documentation CD-ROM in the
CD-ROM drive of your PC.
3. The CD-ROM Installer automatically starts. If
not, browse with the Windows Explorer to the
CD-ROM and double-click on setup.exe.
CAUTION
Do not use the 'Add Printer' wizard to install
the PagePro 1300W/PagePro 1350W driver
and utilities.
4. Follow the instructions on the screen.
5. When the driver and utilities are installed,
remove the CD-ROM and store it in a safe
place.
16
From the Windows menu bar, select:
1. Start ( Settings Printers
)
2. Right-click on the PagePro 1300W/PagePro
1350W printer icon
3. From the dropdown menu, select Properties
4. Select (Win98/Me) : Printer Properties
(Win2000/XP) : Printing Preferences
5. Select the Paper tab
6. Select the printer defaults you use, like the
media size, the orientation of your media,
etc.
7. Click on Apply
8. Click on OK and close all subsequent win-
dows
17
From the Windows menu bar, select:
1. Start ( ) Programs
2. Select: PagePro 1300W/PagePro 1350W
Utilities
3. Select: PagePro 1300W/PagePro 1350W
Status
4. Select the Print tab
5. From the dropdown menu, select Print Sta-
tus Sheet. Your PagePro 1300W/PagePro
1350W prints a status sheet, showing all
control panel situations. Keep this document
near your printer for reference.
6. Close the Status Display by clicking
on (the Status Display icon remains on
the Windows menu bar).
English
Notes :
• Examine the PagePro 1300W/PagePro
1350W User's Guide (in pdf format on the
PagePro 1300W/PagePro 1350W Utilities &
Documentation CD-ROM) for detailed informa-
tion about working with the printer driver,
working with the status display, using media,
replacing consumables, maintaining the
printer, troubleshooting and printer specifica-
tions.
• The General Information Guide lists sources
of service and support for many areas of the
world. It also contains worldwide internet and
ordering approved media and consumables
information.
Note for Windows 98/Me USB users
When you are using a USB connection and you
cannot select the USB port during the installa-
tion of the KONICA MINOLTA PagePro 1300W/
PagePro 1350W driver and utilities in Windows
98 or Windows Me, cancel the CD-ROM instal-
lation procedure and remove the PagePro
1300W/PagePro 1350W Utilities & Documenta-
tion CD-ROM from the PC's CD-ROM drive.
Then proceed as follows :
1. Disconnect the USB cable from the printer
side (leave the connector on the PC side).
2. Turn off the printer and the PC. Then turn
both on again. Wait until the PC and printer
are ready.
3. Insert the PagePro 1300W/PagePro 1350W
Utilities & Documentation CD-ROM in the
CD-ROM drive of your PC. When the CD-
ROM Installer shows up, cancel it.
4. Connect the USB cable with the printer. Now,
the 'New Hardware Found' wizard shows up.
Wait until the 'Add New Hardware' wizard
screen appears. Then click on Next.
5. In the 'Add New Hardware' screen, select
Automatic search for a better driver (Rec-
ommended). Then click on Next.
6. Windows Me : After a few moments, a list of
USB Printing Support drivers on the CD-
ROM will appear. Select one of the drivers
shown (the selected language does not mat-
ter). Click on OK.
Windows 98 : When the next dialog
appears, check the 'Specify a location box'
and then click on Browse. Browse the CD-
ROM and navigate to : driv-
ers\English\Win9x. Then click on OK. Click
on Next to display the next dialog. Click on
Next again to display the next dialog.
7. Wait until Windows finished the installation
and then click on Finish. You have now
installed the USB Printing Support driver
(this is not the printer driver).
8. The 'New Hardware Found' wizard shows up
for a second time. Wait until the (second) 'Add
New Hardware' wizard displays.
Now, select Cancel. Do not install the printer
driver using the (second) wizard!
9. Browse the PagePro 1300W/PagePro
1350W Utilities & Documentation CD-ROM
and double-click on setup.exe.
10.Proceed with the driver installation. You
should now be able to select 'USB001'.
(4136-7749-01A)