Descargar
Compartir
Imprimir esta página
Sauder 404972 Manual Del Usuario
  1. Manuales
  2. Marcas
  3. Sauder Manuales
  4. Almacenamiento de Herramientas
  5. 404972
  6. Manual del usuario

Sauder 404972 Manual Del Usuario

Ocultar thumbs

Publicidad

Enlaces rápidos

Descargar este manual
sauder.com
Executive Desk
Cornerstone Collection | 404972
Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
Get executive
with this decision.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
English pg 1-43
Français pg 44-49
Español pg 50-55
Lot # 364754
10/30/14
Purchased: __________________
Be sure to give us a ring before
making any returns. 1-800-523-3987

Publicidad

loading

Manuales relacionados para Sauder 404972

Resumen de contenidos para Sauder 404972

  • Página 1 Cornerstone Collection | 404972 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987. English pg 1-43 Français pg 44-49...
  • Página 2 D447 LARGE RIGHT DRAWER SIDE (2) TOP (1) MOLDING (2) D707 SMALL DRAWER BOTTOM (2) BOTTOM (2) RETURN MOLDING (1) D708 LARGE DRAWER BOTTOM (2) MODESTY PANEL (1) SMALL RIGHT DRAWER SIDE (2) FIXED SHELF (1) SMALL LEFT DRAWER SIDE (2) Page 2 404972 www.sauder.com/services...

  • Página 3: Part Identifi Cation

    Now you know Part Identifi cation our ABCs. D707 D707 D447 D708 D447 D708 www.sauder.com/services 404972 Page 3...
  • Página 4 FILE CLIP - 8 GROMMET CAP - 2 LEVELER PROPEL NUT - METAL PIN - 4 LEVELER - 4 BRACKET - 4 LOCK - 1 LOCK BRACKET - 1 TOUCH-UP PEN - 1 LOCK COVER - 1 Page 4 404972 www.sauder.com/services...
  • Página 5 BLACK 9/16" LARGE HEAD SCREW - 24 SILVER 9/16" PAN HEAD SCREW - 4 BROWN 7/16" LARGE HEAD SCREW - 1 XX GOLD 5/16" FLAT HEAD SCREW - 32 30S BLACK 1-9/16" FLAT HEAD SCREW - 16 www.sauder.com/services 404972 Page 5...
  • Página 6 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. To begin assembly, push a SAUDER TWIST-LOCK® å FASTENER (GG) into the large holes in the ENDS (A and B).
  • Página 7 Step 2 Fasten the CORNER BLOCKS (W) to the TOP (E). Tighten å How to use the SAUDER TWIST-LOCK ® FASTENER four TWIST-LOCK® FASTENERS. 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. NOTE: The dowel end of the FASTENER must remain fully...
  • Página 8 3. Drawers on the left side only, so the 404379 or å 404380 Return can be fastened to the right side. Follow steps 22-39. 404972 Drawers on both sides of the desk. Continue with steps 4 through 13. (then go to Step 32)
  • Página 9 Push the black lever in and pull the SLIDE from the RAIL. GOLD 5/16" FLAT HEAD SCREW Open end (16 used in this step) Open end Finished edge Open end Finished edge Open end Use the exact holes shown. Open end www.sauder.com/services 404972 Page 9...
  • Página 10 Fasten the RIGHT END (A) to the TOP (E). Tighten three å Drawers on both sides of the desk TWIST-LOCK® FASTENERS. Fasten the BOTTOM (F) to the RIGHT END (A). Tighten å two TWIST-LOCK® FASTENERS. Surface with TWIST-LOCK® FASTENERS Finished edge These holes must be here. Page 10 404972 www.sauder.com/services...
  • Página 11 Fasten the RIGHT UPRIGHT (C) to the TOP (E) and å Drawers on both sides of the desk BOTTOM (F). Tighten four TWIST-LOCK® FASTENERS. Fasten the LEFT UPRIGHT (D2) to the TOP (E). Tighten å two TWIST-LOCK® FASTENERS. Finished edge Finished edge www.sauder.com/services 404972 Page 11...
  • Página 12 Drawers on both sides of the desk Now, fasten the LONG SUPPORT ROD (EE) to the TOP (E). Use two å SILVER 9/16" PAN HEAD SCREWS (VV). SILVER 9/16" PAN HEAD SCREW (2 used in this step) Page 12 404972 www.sauder.com/services...
  • Página 13 Insert the METAL PINS (QQ) in one end of the FIXED å SHELF (H) into the holes in the LEFT UPRIGHT (D2). Fasten the other BOTTOM (F) to the LEFT UPRIGHT (D2). å Tighten two TWIST-LOCK® FASTENERS. Surface with TWIST-LOCK® FASTENERS (4 used) Finished edge www.sauder.com/services 404972 Page 13...
  • Página 14 Drawers on both sides of the desk Tighten fi ve TWIST-LOCK® FASTENERS. NOTE: Be sure the METAL PINS in the FIXED SHELF (H) å insert into the holes in the LEFT END. Hey! It's starting to look like something! Page 14 404972 www.sauder.com/services...
  • Página 15 Hand tighten the TURNBUCKLE until it is snug. Now, use your screwdriver å to tighten the TURNBUCKLE another 1/4 turn. NOTE: Tighten the TURNBUCKLE more if the TOP ever begins to sag. å SILVER 9/16" PAN HEAD SCREW (2 used in this step) www.sauder.com/services 404972 Page 15...
  • Página 16 9/16" LARGE HEAD SCREWS (UU). NOTE: There are no pre-drilled holes in the MOLDINGS. å The SCREWS will tighten into the grooves. BLACK 9/16" LARGE HEAD SCREW (20 used in this step) (10 used) Flat edge Flat edge Page 16 404972 www.sauder.com/services...
  • Página 17 Push the MODESTY PANEL (G) onto the TWIST-LOCK® å FASTENERS in the RIGHT END (A) and LEFT END (B). Now, tighten ten TWIST-LOCK® FASTENERS in the ENDS (A and B) and UPRIGHTS (C and D2). Notch www.sauder.com/services 404972 Page 17...
  • Página 18 LEVELER (OO) into each of the PROPEL NUTS. Carefully stand your unit upright. Go to step 32 and å continue assembly. (4 used) BLACK 9/16" LARGE HEAD SCREW (4 used for the METAL BRACKETS) (2 used) Page 18 404972 www.sauder.com/services...
  • Página 19 GOLD 5/16" FLAT HEAD SCREW Open end (12 used in this step) Open end Finished edge Open end This UPRIGHT will Finished edge not be used until the Return is assembled. Use the exact holes shown. www.sauder.com/services 404972 Page 19...
  • Página 20 Fasten the RIGHT END (A) to the TOP (E). Tighten three å Drawers on right side of the desk TWIST-LOCK® FASTENERS. Fasten the BOTTOM (F) to the RIGHT END (A). Tighten å two TWIST-LOCK® FASTENERS. Surface with TWIST-LOCK® FASTENERS Finished edge These holes must be here. Page 20 404972 www.sauder.com/services...
  • Página 21 Fasten the LONG SUPPORT ROD (EE) to the TOP (E). Rome. This can be built å in a day. Use two SILVER 9/16" PAN HEAD SCREWS (VV). Finished edge SILVER 9/16" PAN HEAD SCREW (2 used in this step) www.sauder.com/services 404972 Page 21...
  • Página 22 å screwdriver to tighten the TURNBUCKLE another 1/4 turn. NOTE: Tighten the TURNBUCKLE more if the TOP ever begins to sag. å SILVER 9/16" PAN HEAD SCREW (2 used in this step) Spacer (from the Return) Page 22 404972 www.sauder.com/services...
  • Página 23 BLACK 9/16" LARGE HEAD SCREWS (UU). NOTE: There are no pre-drilled holes in the MOLDINGS. å The SCREWS will tighten into the grooves. BLACK 9/16" LARGE HEAD SCREW (16 used in this step) (8 used) Flat edge Flat edge www.sauder.com/services 404972 Page 23...
  • Página 24 FASTENERS out of the holes. Push the MODESTY PANEL (G) onto the TWIST-LOCK® å FASTENERS in the RIGHT END (A) and LEFT END (B). Now, tighten eight TWIST-LOCK® FASTENERS in the ENDS (A and B) and RIGHT UPRIGHT (C). Notch Page 24 404972 www.sauder.com/services...
  • Página 25 Fasten two METAL BRACKETS (HH) to the TOP (E) and å Drawers on right side of the desk MODESTY PANEL (G). Use four BLACK 9/16" LARGE HEAD SCREWS (UU). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) (2 used) www.sauder.com/services 404972 Page 25...
  • Página 26 BRACKET and into the holes in the ENDS. Now, turn a LEVELER (OO) into each of the PROPEL NUTS. Pro Tip: Lift with your legs. And, you know, Carefully stand your unit upright. Go to step 32 and your arms. å continue assembly. (4 used) Page 26 404972 www.sauder.com/services...
  • Página 27 (12 used in this step) Use the exact Open end holes shown. This UPRIGHT will Finished edge not be used until the Return is assembled. Finished edge Open end Use the exact holes shown. Open end www.sauder.com/services 404972 Page 27...
  • Página 28 Step 23 Fasten the ENDS (A and B) to the TOP (E). Tighten six å Drawers on left side of the desk TWIST-LOCK® FASTENERS. These holes must be here. Page 28 404972 www.sauder.com/services...
  • Página 29 Fasten the LONG SUPPORT ROD (EE) to the TOP (E). å Drawers on left side of the desk Use two SILVER 9/16" PAN HEAD SCREWS (VV). SILVER 9/16" PAN HEAD SCREW (2 used in this step) www.sauder.com/services 404972 Page 29...
  • Página 30 Insert four METAL PINS (QQ) into the FIXED SHELF (H). å Insert the METAL PINS (QQ) in one end of the FIXED å SHELF (H) into the holes in the LEFT END (B). Surface with TWIST-LOCK® FASTENERS (4 used) Finished edge Page 30 404972 www.sauder.com/services...
  • Página 31 BOTTOM (F). Tighten four TWIST-LOCK® FASTENERS. Don't worry. It isn't NOTE: Be sure the METAL PINS in the FIXED SHELF (H) å Rome. This can be built insert into the holes in the LEFT UPRIGHT. in a day. www.sauder.com/services 404972 Page 31...
  • Página 32 å screwdriver to tighten the TURNBUCKLE another 1/4 turn. NOTE: Tighten the TURNBUCKLE more if the TOP ever begins to sag. å Spacer (from the Return) SILVER 9/16" PAN HEAD SCREW (2 used in this step) Page 32 404972 www.sauder.com/services...
  • Página 33 BLACK 9/16" LARGE HEAD SCREWS (UU). NOTE: There are no pre-drilled holes in the MOLDINGS. å The SCREWS will tighten into the grooves. BLACK 9/16" LARGE HEAD SCREW (16 used in this step) (8 used) Flat edge Flat edge www.sauder.com/services 404972 Page 33...
  • Página 34 FASTENERS out of the holes. Push the MODESTY PANEL (G) onto the TWIST-LOCK® å FASTENERS in the RIGHT END (A) and LEFT END (B). Now, tighten eight TWIST-LOCK® FASTENERS in the ENDS (A and B) and LEFT UPRIGHT (D2). Notch Page 34 404972 www.sauder.com/services...
  • Página 35 Fasten two METAL BRACKETS (HH) to the TOP (E) and å Drawers on left side of the desk MODESTY PANEL (G). Use four BLACK 9/16" LARGE HEAD SCREWS (UU). BLACK 9/16" LARGE HEAD SCREW (4 used in this step) (2 used) www.sauder.com/services 404972 Page 35...
  • Página 36 BRACKET and into the holes in the ENDS. Now, turn a Pro Tip: Lift with your LEVELER (OO) into each of the PROPEL NUTS. legs. And, you know, your arms. Carefully stand your unit upright. å (4 used) Page 36 404972 www.sauder.com/services...
  • Página 37 Fasten the LOCK (ZZ) to the LEFT UPRIGHT (D2). Use å two SILVER 3/4" PAN HEAD SCREWS (BBB). Push the LOCK COVER (AAA) over the LOCK (ZZ). å SILVER 3/4" PAN HEAD SCREW (2 used in this step) www.sauder.com/services 404972 Page 37...
  • Página 38 DRAWER SIDES (D447 and D88). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S). NOTE: Be sure the LARGE DRAWER BOTTOM (D708) å inserts into the groove of the LARGE DRAWER BACK (D78). Repeat this step for the other drawers. å Page 38 404972 www.sauder.com/services...
  • Página 39 EXTENSION SLIDES (BB) and holes #1 and #3. Screw head - turn CAM to line up holes in the SLIDES with holes in DRAWER SIDES Open end D447 Open end GOLD 5/16" FLAT HEAD SCREW (16 used in this step) www.sauder.com/services 404972 Page 39...
  • Página 40 å DRAWER SIDE (D447) of the left drawer. Use a BROWN Almost time to 7/16" LARGE HEAD SCREW (WW). celebrate! With a nap. D447 Left Drawer BROWN 7/16" LARGE HEAD SCREW (1 used in this step) Page 40 404972 www.sauder.com/services...
  • Página 41 European size fi les, use the FILE RODS (CC) and the FILE CLIPS (II). Set a FILE CLIP onto each FILE GLIDE (6B), then press a FILE ROD (CC) into the notches on the FILE CLIPS. Repeat this step for the other large drawer. å D447 www.sauder.com/services 404972 Page 41...
  • Página 42 For long-term care and maintenance of your unit, you å may touch up the edges with the TOUCH-UP PEN (TT). 15 lbs. 100 lbs. 35 lbs. 15 lbs. 35 lbs. Page 42 404972 www.sauder.com/services...
  • Página 43 #4. The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw, the lower the drawer front. www.sauder.com/services 404972 Page 43...

  • Página 44: Liste De Pièces

    élément et conserver le livret pour future référence. EXTRÉMITÉ DROITE ................1 (ENSEMBLE DE EXTENSION ILLUSTRÉ À PART) Pour contacter Sauder EXTRÉMITÉ GAUCHE ................ 1 GLISSIÈRE D’EXTENSION ..............4 en ce qui concerne cet MONTANT DROIT ................. 1 COULISSE D’EXTENSION ..............4...
  • Página 45 éviter d’endommager l’élément ou le sol. l’EXTRÉMITÉ. Faire tourner une VIS dans ce trou. Pour commencer l’ a ssemblage, enfoncer une FIXATION TWIST-LOCK® SAUDER (GG) dans les gros trous de l’EXTRÉMITÉ ÉTAPE 5 DROITE (A) et l’EXTRÉMITÉ GAUCHE (B). Répéter cette étape pour les MONTANTS (C et D), le DESSUS (E) et les...
  • Página 46 EXTRÉMITÉS (A et B) et les MONTANTS (C et D2). Fixer l’EXTRÉMITÉ GAUCHE (B) au DESSUS (E). Serrer trois FIXATIONS TWIST-LOCK® . Fixer la TIGE DE SUPPORT LONGUE (EE) au DESSUS (E). Utiliser deux VIS ARGENTÉES TÊTE GOUTTE DE SUIF 14 mm (VV). Page 46 404972 www.sauder.com/services...
  • Página 47 TABLETTE FIXE (H) dans les trous dans l’EXTRÉMITÉ GAUCHE (B). ÉTAPE 20 Fixer deux CONSOLES EN MÉTAL (HH) sur le DESSUS (E) et le VOILE DE FOND (G). Utiliser quatre VIS NOIRES TÊTE LARGE 14 mm (UU). www.sauder.com/services 404972 Page 47...
  • Página 48 Fixer les MOULURES (U et V) au DESSUS (E). Utiliser huit VIS NOIRES TÊTE LARGE 14 mm (UU). REMARQUE : Les MOULURES D’EXTRÉMITÉ (II) ne comportent pas de trous pré-percés. Serrer les VIS dans les rainures. Page 48 404972 www.sauder.com/services...
  • Página 49 DOSSIER (II). Poser un CLIP DE DOSSIER sur chaque ARMATURE POUR DOSSIERS (6B), puis appuyer une TIGE DE DOSSIER (CC) dans les crans des CLIPS DE DOSSIER. Répéter cette étape pour l’ a utre grand tiroir. www.sauder.com/services 404972 Page 49...

  • Página 50: Lista De Partes

    EXTREMO IZQUIERDO ..............1 VARILLA DE SOPORTE..............1 pour future référence. PARAL DERECHO ................. 1 VARILLA DE SOPORTE LARGA ............. 1 Pour contacter Sauder PARAL IZQUIERDO ................1 TENSOR ......................1 en ce qui concerne cet PANEL SUPERIOR ................. 1 SUJETADOR TWIST-LOCK®...
  • Página 51 Para comenzar el ensamblaje, empuje un SUJETADOR con el agujero del EXTREMO. Atornille un TORNILLO dentro de TWIST-LOCK® SAUDER (GG) dentro de los agujeros grandes del este agujero. EXTREMO DERECHO (A) y del EXTREMO IZQUIERDO (B). Repita...
  • Página 52 IZQUIERDO (B). Ahora, apriete diez SUJETADORES TWIST-LOCK® de Fije la VARILLA DE SOPORTE LARGA (EE) al PANEL los EXTREMOS (A y B) y de los PARALES (C y D2). SUPERIOR (E). Utilice dos TORNILLOS PLATEADOS DE CABEZA REDONDA de 14 mm (VV). Page 52 404972 www.sauder.com/services...
  • Página 53 Empuje el VELO DE FONDO (G) sobre los SUJETADORES TWIST-LOCK® del EXTREMO DERECHO (A) y del EXTREMO IZQUIERDO (B). Ahora, apriete ocho SUJETADORES TWIST-LOCK® de los EXTREMOS (A y B) y del PARAL DERECHO (C). www.sauder.com/services 404972 Page 53...
  • Página 54 Cuidadosamente ponga la unidad en posición vertical. comience a combarse. PASO 32 Fije la CERRADURA (ZZ) al PARAL IZQUIERDO (D2). Utilice dos TORNILLOS PLATEADOS DE CABEZA REDONDA de 19 mm (BBB). Empuje la CUBIERTA DE CERRADURA (AAA) sobre la CERRADURA (ZZ). Page 54 404972 www.sauder.com/services...
  • Página 55 NOTA: Por favor lea las páginas fi nales del folleto de instrucciones para información importante sobre la seguridad. Esto completa el ensamblaje. Para la limpieza, utilice el pulimento para muebles preferido o un paño húmedo. Seque con un paño. www.sauder.com/services 404972 Page 55...
  • Página 56 • This product is not designed to support a not designed to support a television is heavy. Plus the weight and location of the television. hazardous. picture tube tends to make TVs unbalanced and prone to tipping forward. Page 56 404972 www.sauder.com/services...
  • Página 57 à Les téléviseurs peuvent être particulièrement un téléviseur. cet eff et. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/services 404972 Page 57...
  • Página 58 Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 58 404972 www.sauder.com/services...

  • Página 59: Garantie Limitée De 5 Ans

    GARANTIE LIMITÉE DE 5 ANS 1. Sauder Woodworking Co. (Sauder®) off re une couverture de garantie limitée à l’ a cheteur 4. La présente garantie ne s’ a pplique qu’ a ux défauts garantis qui se produisent pour initial du présent produit pendant une période de cinq ans à...
  • Página 60 Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.