D - Configuration; Quick Configuration Wizard; Camera Configuration Page; Programme Page - Thompson 512322 Manual Del Usuario

d - CONFigurATiON

1 - QUICK CONFIGURATION WIZARD

When you switch on your device for the first time,
the configuration wizard is launched and you can set
up your device in just a few clicks.
If you want to disable the wizard the next time you
switch on your device, check the "Désactiver
l'assistant au prochain reboot" (Disable the
wizard at the next start-up) box.
Click on "Suivant" (Next) to start the quick
configuration wizard on your device.
1.1 - netWork page
Configure your recorder's network settings here.
Leaving the default settings on is recommended:
"DHCP" ticked, "UPNP" ticked. Click "Suivant"
(Next) to continue.
10
en
Plug and Play 8 channel colour
network video recorder

1.2 - camera configuration page

Cameras connected to the same network as the
recorder will appear here. To speed up detection,
click the "Attribution auto IP/Caméras" (Auto IP/
camera assignment) button. Click "Suivant" (Next)
to continue.
(Refer to paragraph 2.9 "Manual
pairing of cameras" for more details.)

1.3 - programme page

From here you can set weekly recordings for each of
the cameras, half hour by half hour for the entire week.
• The diagram on the screen shows the behaviour
pattern adopted for the entire week. The
graduated scale at the top of the diagram
indicates the time on the selected day (0 to 24).
The letters on the left indicate the corresponding
day of the week: "S" = Sunday, "M" = Monday,
"T" = Tuesday, "W" = Wednesday, "T" =
Thursday, "F" =Friday, "S" = Saturday. Permanent
(normal) recording is activated for the entire
week: each half-hour is coloured green.