Enregistrement" (Recording) Tab - Thompson 512322 Manual Del Usuario

d - CONFigurATiON
• The "Direct" tab: lets you set
a personalised name, brightness, contrast, etc.
separately for each camera
• The "Sortie" (Output) tab: lets you set the resolution
of the image transmitted to the TV screen or
monitor connected to your video recorder.
• The "Contrôle image" (Image control) tab: gives
you access to the advanced image controls on
each camera. From here you can rotate or tilt
the image from a camera that was installed
upside down, for example.
• The "Zone masque" (Mask area) tab: defines a
mask for each camera, to hide an
area that should not appear on the screen or on
video recordings.
12
en
Plug and Play 8 channel colour
network video recorder

2.1.2 - "enregistrement" (recording) tab

Here you will find:
• The "Enregistrement" (Recording) tab that
activates or deactivates video recording for
each camera and the pre-recording time. The
pre-recording time allows each video recording
triggered by movement to capture the 5 seconds
before the trigger.
• The "Programmation" (Programming) tab: same
page as shown in the quick configuration wizard.