Preparing For The Installation Of The Tv - Sony SU-WL450 Información De Instalación

Preparing for the installation
of the TV
Refer to the Setup Guide for stand installation.
1
Remove the screws from the
rear of the TV.
KD-65XE70
2
Detach the Table-Top Stand
from the TV.
KD-55XE70
KD-49/43XE70
3
Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
"Supplied with SU-WL450" in
"Checking the parts" on page
5.
Note
 Firmly secure the Attachment parts using screws.
 When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
 Be sure to store the unused parts in a safe place for
future use. Retain this manual for future reference.
KD-65XE70
Standard mounting (2-a)
Belt 
Slim mounting (2-b)
Note
 You cannot use some of the terminals on the rear of
the TV when using this mounting style.
Belt 
− 9 (GB) −
Pulley 
Screw
(+PSW 6 x 20) 
Spacer
(60 mm) 
Screw (+PSW 6 x 50) 
Pulley 
Spacer (20 mm)

Screw (+PSW 6 x 20) 
GB