Wall Mounting; Connecting The Cord - Pioneer S-HV600B Manual De Instrucciones

4 Mount on wall.
Wall
mounting
screws
(available
commercially)*
6 mm to 8 mm
* Wall mounting screws are not included. Purchase
appropriate screws taking into consideration the type
of wall and the weight of the speaker system.
Open two holes in the wall 818 mm apart.
818 mm
S-HV500-LR

Wall mounting

To mount the unit on a wall, first use the vertical-installation screw
to fasten the wall-mount brackets to the unit, then fasten the
bracket to the wall.
When mounting the unit on a wall, confirm that the wall construc-
tion is of a type that allows the mounting screws (available com-
mercially) to tighten fully and hold the speaker securely.
A wall made from weak material or of insufficient strength will be
unable to support the weight of the speaker, potentially resulting
in the speaker's falling.
Open two holes in the wall 95 mm apart.
5 mm
10 mm
Wall mounting
screws
(available
commercially)*
6 mm to 8 mm
* Wall mounting screws are not included. Purchase
appropriate screws taking into consideration the
type of wall and the weight of the speaker system.
• When mounting the unit on a wall, unit weight and mounting
methods may result in the danger of tipping or falling. Be very
careful to prevent accidents.
• During installation, take care to confirm that the location
chosen is fully able to support the weight of the unit. If you are
uncertain about the strength of the wall, consult a building
specialist.
• Pioneer takes no responsibility for damage or injury resulting
from faulty or improper installation, modification of the unit, or
natural disasters.
When mounting the unit on speaker stand
Use the accessory bracket when mounting the unit on any speak-
5 mm
er stand or base other than those provided.
Use M5 screws for installation. Mounting screws are not provided.
10 mm
Follow the instructions accompanying your selected speaker
stand or base.
Connection

Connecting the cord

S-HV600B/S-HV500-LR
1 Switch off the power to your amplifier.
• Connect the wire with the colored marker to the red (+)
terminal; the plain wire to the black (–) terminal.
To minus
side (black)
2 Connect the other ends of the cords to the amp's speaker
output terminals (for more details, refer to your amp
instruction manual).
95 mm
60 mm
Red tube
(–)
(+)
To plus
side (red)
7
En