Publicidad
Step 11
Carefully turn your unit over onto its front edges. Unfold the BACK (G)
å
and lay it over your unit.
Line up the bottom edge of the BACK (G) with the BOTTOM (F), then
å
push on opposite corners of your unit if needed to make it "square".
Fasten the BACK (G) to your unit using the NAILS (VV).
å
NOTE: Be sure to tap NAILS into the holes that line up over the
å
UPRIGHTS (C and D).
NOTE: Perforations have been provided for access through the BACK.
å
Carefully cut out the holes needed.
Push two FEET (HH) into the holes in BOTTOM (F).
å
www.sauder.com/services
These holes must line up over
the UPRIGHTS (C and D).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
This perforation should be
closer to the BOTTOM (F).
G
F
HH
411865
Caution
VV
NAIL
(46 used in this step)
HH
Page 15
Publicidad
