Changing System Configuration; Adding And/Or Replacing Inverters - Steca Grid 300 Manual De Instalación Y Manejo

EN
5

Changing system configuration

5.1

Adding and/or replacing inverters

WARNING!
Risk of death by electrocution!
Do not open the housings of the devices under any circum-
X
stances.
Work on the inverter may only be performed by qualified
X
personnel in accordance with the legal regulations.
1
Turn the system off.
X
2
If the existing DIN rails are too short, fit rails of
X
adequate length.
3
Add the new StecaGrid 300 or 500 to the left hand end
X
of the array. Ensure that the AC connectors are installed
correctly. If a single inverter needs to be replaced, it is
preferable to install the new inverter in the same positi-
on as the old one.
735.794 | 11.30
29